Company News

In bulk material conveing systems, drive drum lagging serves as a key component to prevent belt slippage and guarantee stable operation.Excessive wear or detachment of lagging may cause belt slippage and deviation in mild cases, or production shutdowns and safety accidents under severe conditions.However, full drum replacement is not always required to address wear. Replacing or on-site repairing the covering can often restore equipment performance at lower cost and with less downtime.

Mining belt conveyors can continuously transport wet and dry powdery, lumpy, and even packaged goods. Even under the complex conditions of heavy loads and high wear in mines, they can operate stably thanks to their high-strength structural design. However, this also makes the safety management of mining conveyors a top priority for mine safety production. We have systematically reviewed the full-process safety regulations for mining belt conveyors, providing clear guidance for enterprises to strengthen their transportation safety defenses.

Currently, many traditional conveyors in use suffer from excessive drive energy consumption and low energy utilization efficiency. From the perspective of the industry's underlying technical logic, excessive energy consumption in conveyor drive systems is not caused by a single reason, but rather by the combined effect of five core factors: unreasonable selection and design, mismatch between load and drive device, mechanical transmission losses, extensive control mode, and insufficient operation and maintenance management.

As a core continuous conveying equipment, the operational stability of belt conveyors directly affects production line efficiency and safety. Belt slippage not only causes problems such as belt wear, tearing, and material spillage, but in severe cases, it can also lead to major hidden dangers such as shutdowns, production stoppages, and safety accidents.

Primary cleaner installed below the horizontal line of the drive roller at the head of the conveyor, close to the discharge port, it can sweep most of the residual material on the working surface of the conveyor belt into the hopper, mainly scraping off large pieces of material and thick, attached material.

As the core component of belt conveyors in industries such as mining,coal,and ports,the maintenance and upkeep of conveyor belts affect equipment operation efficiency,production safety and service life.To make better use of conveyor belts and extend their service life,it is essential to strengthen regular inspections of conveyor belts.